What is a Metal Scrap Yard?

If you asked a movie director, a metal scrap yard is a desolate place filled with old cars, junk, and mean dogs. But in reality, these places serve a much higher purpose.

A metal scrap yard is a place that lets you not only make a bit of extra cash, but also helps with the recycle economy and saves a ton of energy and raw natural resources. Here are a couple of things you may not know about metal scrap yards.

What is a Metal Scrap Yard?

A metal scrap yard is simply a place to bring your scrap metal to be recycled. Many yards, like Community Recycling in Plano, will pay you for your scrap metal. 

After you drop your scrap metal off, it is sorted and processed for recycling in many ways. Many yards have large magnets that are able to sort between ferrous and non-ferrous metals. 

To process the metal, some yards have large metal shredders to make the metal easier to handle and compress. Many metal scrap yards have large presses that squeeze scrap metal into large uniform blocks to make it easier to handle and store. The scrap is then either sent off or melted on site with giant furnaces. These furnaces melt and purify the metal which are then made into giant blocks or sheets for use by factories.

How much metal ends up in Landfills?

Not all waste metal is sent to recycling plants like Community Recycling. As a matter of fact, there are enough cans thrown into American landfills every year to rebuild all commercial airplanes 4 times. Also, Americans toss 2 billion razor blades into the trash every year.

How much is all this scrap metal worth?

A new trend called landfill mining is taking hold. In southern Maine, a four year landfill mining project found $7.42 million worth of metals. We are throwing literal fortunes into landfills every year.

How much money can I make at a Metal Scrap Yard?

Prices at metal scrap yards vary daily with market prices, but a general estimate is about $200/ton of ferrous metal, $0.50/lb of aluminum, and over $2.00/lb of #1 bare copper.

The best way to find out how much you can make is to call us at Community Recycling for today’s prices. Call today at (972) 423-3824.

How to Get The Most Out of Today’s Scrap Metal Pricing

If you’re in the middle or even at the end of your Spring Cleaning routine, you may have a pile of cash just sitting there. What kinds of scraps are you throwing away? Most people are getting rid of all kinds of scrap metal that could actually get them some cash when recycled. Before taking your pile to the junkyard, take a look at this guide and see if you can get something out of today’s scrap metal pricing.

What can I recycle?

If you’re wanting to get the most money you can get from today’s scrap metal pricing, you should focus on bringing in high-value metals like copper, aluminum, and brass. You can also get paid for recycling electric motors, pool pumps, appliances, and certain computer electronics.  Pretty much any metal products that contain non-ferrous metals can be recycled at Community Recycling in Plano, TX.

When you do plan on bringing in a load of scrap metal to recycle, you can save yourself some time and maybe even get some more money for your scrap by sorting out your metals and disassembling any machines. We will be able to give you the scrap metal pricing for each different metal instead of an average price for the entire load.

Give us a call for today's scrap metal prices

How much is my scrap metal worth?

Today’s scrap metal pricing changes all the time, sometimes even hour by hour. The best way to get an accurate estimate is to fill out our form online or call us at (972) 423-3824. We’ll be able to ask you important questions about what you’re bringing in and then we can tell you what to expect from today’s scrap metal pricing. 

Electric Motor Recycling 101

Although you may not have a Tesla in your driveway, your house is probably full of electric motors. They power your dishwasher, blender, washer and dryer, and so much more around the house. If you’ve ever had an appliance go out on you, then you should know about electric motor recycling.

Did you know that you could get paid to recycle many of your dead appliances? Here’s how you can do that and more with electric motor recycling.

Recyclable Parts of an Electric Motor

Before diving head first into electric motor recycling, it’s a good idea to learn a little more about what it inside an electric motor.

Most electric motors are composed of magnets, wires, and different types of metal that can all be recycled. The part of the motor that moves, called the rotor, is often a steel shaft that has metal plates that are wrapped in wire attached around it. These wires carry electrical current and so are usually made from copper. Copper is a very valuable part of electric motor recycling because of its various applications in all kinds of machinery.

The part of the motor that is stationary is called the stator and has a lot going on that is important to electric motor recycling. The housing of the motor is typically steel while inside is either magnets or lots of windings. These windings are thin pieces of metal or soft iron magnets that are heavily wrapped in wires. The wire in a stator is also often copper and is one of your more valuable metals.very valuable to electric motor recycling processes.

In short, almost every component of an electric motor is worth recycling.

Electric motor recycling

How Much is my Electric Motor Worth?

The amount of money you can get for recycling an electric motor varies based on factors such as the weight of the electric motor, the specific materials that are inside, and the market rates for the day. The best way to get an accurate number is to swing by Community Recycling in Plano, TX or give us a call at (972) 423-3824. That way, we’ll be able to ask the right questions so you can get the most out of your electric motor recycling.

Summer is the Season for Pool Pump Recycling

You’ve probably gotten this call a few times at the beginning of summer:
“Hi, we were getting the pool ready for summer, but the pool pump has gone bad. Can you come replace it?”

So you swing by the client’s house and replace the pump. You’re happy. They’re happy. But what do you do with the old pump? This is your opportunity to take advantage of the  pool pump recycling program at Community Recycling in Plano, TX.. Here are some details of how it works.

What is Pool Pump Recycling?

As you probably already know, pool pumps consist of the wet end (gaskets, impellers, diffusers, cover, and strainer basket) and an electric motor. Both ends are great candidates for pool pump recycling because they are made from valuable materials such as copper, brass, and steel.

Our pool pump recycling program is the green way to do away with those old pumps. You’ll be able to earn some money by selling the pumps and the pumps themselves don’t see a landfill. By bringing your old pumps to Community Recycling, we’ll give you a great price for any pump that and we make sure the material is recycled and used to build another product. Who knows, maybe they’ll be made into another pool pump you can recycle again. Many materials like copper and aluminum can be infinitely recycled.

How much is a pool pump worth?

Prices will vary based on the size of the pump, the specific materials in the pump and motor, and market rates for the day. The rates do change from day to day, so be sure to call in before you come to make sure you’re getting the best deal for pool pump recycling.

If you’re ready to learn more about how you can add some more revenue to your pool repair business and keep it green with a pool pump recycling program, call us today at (972) 423-3824. We are conveniently located in Downtown Plano

5 Reasons to Recycle Scrap Metal

One of the extraordinary qualities of metals is their ability to be used over and over and over again. Common metals such as copper, lead, and aluminum can easily be melted and forged into new shapes and products without loss in quality of the material itself. This re-usability is the reason that we can enjoy the benefits of recycling scrap metal.


Save energy

It takes a lot of energy to create metals from virgin ore. Just think about what it takes to get the metal out of the earth, then refine it, then create the products themselves. That’s a lot of work! Recycling metal can save a ton of energy compared to mining it. Here are some of the energy savings for recycling different scrap metals:

Aluminum – 92%

Copper – 90%

Lead – 75%


Save the Environment

When using recycled metals, the demand for new ore decreases. The decrease in ore leads to less strip mining and other environmentally damaging practices. If these practices and the pollution they cause continue to decrease, air quality and general quality of life will increase around the mining sites. Recycling also uses 40% less water than mining virgin ore.



There is an enormous amount of metal that is currently found in landfills across the world. Imagine the impact recycling all of the scrap metal there would have on those areas. There could be more opportunities for parks or other better uses for land.



One of the major benefits of recycling scrap metal is the number of jobs the industry has created: nearly 500,000. A recycling center can have incredible impact on a local economy, adding potentially billions of dollars in revenue.


You could get paid!

At Community Recycling, we’ll pay you to recycle your scrap metal. Prices vary greatly from metal, so be sure to call us at (972) 423-3824 to get the daily prices.

917 K Ave. Plano, TX 75074


(972) 423-3824


This helps us prevent spam, thank you.